GYZJ 3.5 CFM Rotary Vane Economy Vacuum Pump 1/4HP Single Stage for A/C HVAC Refrigerant Recharging Auto Repair R410a R134 with Oil. [Key Parameter] : Flow Rate: 3.5 CFM, Ultimate Vacuum:5 pa, 75 microns, 1/4HP AC air tool rotary vane vacuum pump, Inlet Port: 1/4 Flare, Voltage /Frequency: 110V/60Hz, Oil Capacity:220 ml, Full body pure aluminum, good thermal conductivity, stronger and more durable. Perfect for maintaining R134, R134A, R12, R22, R22A, R404A, R407C, R502 and R410A systems. [Professional Refrigeration Maintenance Equipment]: Our vacuum pump adopts a direct-connected motor structure, which makes the structure more compact, smaller in size, lighter in weight and easy to carry.Suit for those who are looking to self diagnose or recharging AC systems; It maintains air conditioning systems by efficient removing moisture before refilling the refrigerant. [Stable Operation]: The built-in motor is cast by a full copper movement, which is better than aluminum wire and has a longer service life, also running faster. Strong copper motor makes the vacuum pump operate stably, Greatly increase the vacuuming speed. [Large Oil Window Design]: The vacuum pump adopts a large oil window design, and the minimum and maximum oil levels in the pump can be seen at a glance, preventing the machine from running out of oil during operation, and can always pay attention to the refueling situation. Besides, The trap contains a filter mesh, which can moderately filter oil mist and reduce pollution. [Strong Heat Dissipation, Anti-reflux]: The vacuum pump adopts a strong heat dissipation design, and the air flap at the rear of the boot is intervened to force cooling. At the same time, the noise generated during the operation of the machine is well reduced. The air inlet channel is specially designed to prevent the pump oil from flowing back and polluting the pumped container and pipeline after the pump is stopped.
Free Air Displacement: 3 CFM 2. Ultimate Vacuum: 5 Pa 3. Oil Capacity:320 ml 5. Inlet Port: 1/4 Flare 7. Dimensions: (14.1711.027.09) / (36 28 18)cm (L x W x H) 10.
Material: Plastic & Aluminum Alloy Shock-Proof & Wear-Resistant Base The vacuum pump base was made of composite rubber material, shock absorption and seismic resistance, extend machine life. Four rubber bottoms increase product stability, anti-skid rubber feet to ensure minimum movement. Oil Anti-Flow Back Design The refrigerant vacuum pump is designed to prevent oil from flowing back and polluting its container and tubes. The Solenoid valve can automatically cut off the power supply failure, effectively prevent gas reflux.Easy Monitoring This rotary vane vacuum pump comes equipped with an oil viewing window so that you can easily monitor oil levels and quality, prevention of oil deficiency. Oil Drain valve positioned at the bottom of the oil reservoir and angled for faster, more complete draining. Any product you return must be in the same condition you received it and in the original packaging. We usually respond within 24 hours on weekdays.
Thank you for shopping at our store! This item is in the category "Business & Industrial\Other Business & Industrial".The seller is "parcel_direct" and is located in this country: US. This item can be shipped to United States.